ENGLISH
OPERATION MANUAL
BRITEQ
®
8/78
BTX-BEAM 2R
(pan/tilt will feedback if they are out of step.),
press
ENTER
button to store. Press the
MENU
button to go back to the last menu, if you leave
the unit unused for one minute it will
automatically exit from menu mode.
BL.O. P/T Moving
(Blackout while pan/tilt
moving)
Select
BL.O. P/T Moving
, Press
ENTER
button
to confirm, current mode will blink on the display,
use
UP
and
DOWN
buttons to select
No
(normal
while pan/tilt are moving) or
Yes
(blackout while
pan/tilt are moving), press
ENTER
button to
store. Press the
MENU
button to go back to the
last menu, if you leave the unit unused for one
minute it will automatically exit from menu mode.
BL.O. Color Change
(Blackout while change
color)
Select
BL.O. Color Change
, press
ENTER
button to confirm, current mode will blink on the
display, use
UP
and
DOWN
buttons to select
No
(normal while the color is changing) or
Yes
(blackout while the color is changing), press
ENTER
button to store. Press the
MENU
button
to go back to the last menu, if you leave the unit
unused for one minute it will automatically exit
from menu mode.
BL.O. Gobo Change
(Blackout while change
gobo)
Select
BL.O. Gobo Change
, press
ENTER
button to confirm, current mode will blink on the
display, use
UP
and
DOWN
buttons to select
No
(normal while gobo is changing) or
Yes
(blackout
while gobo is changing), press
ENTER
button to
store. Press the
MENU
button to go back to the
last menu, if you leave the unit unused for one
minute it will automatically exit from menu mode.
Lamp Setting
Enter menu mode, select
Lamp Setting
, press
ENTER button to confirm, use UP and DOWN
buttons to select
On/Off, State/Power on, Off
Via DMX, On if DMX on, Off if DMX off,
Cooling Mode, Ignition Delay
or
Low Power
Delay
On/Off
(Turn on/off the lamp)
Select
On/Off
, press
ENTER
button to confirm,
current mode will blink on the display, use
UP
and
DOWN
buttons to select
On
(lamp on) or
Off
(lamp off), press
ENTER
button to store. Press the
MENU
button to go back to the last menu, if you leave the
unit unused for one minute it will automatically exit from menu mode.
State/Power On
(Lamp state while power on)
Select
State/Power On
, press
ENTER
button to confirm, current mode will blink on the display, use
UP
and
DOWN
buttons to select
On
(Lamp strike during the startup reset) or
Off
(Lamp is off at the startup), press
ENTER
button to store. Press
MENU
button back to the last menu or let the unit idle one minute to exit menu
mode.
