ENGLISH
OPERATION MANUAL
BRITEQ
®
10/18
BT-W12L10
ELECTRICAL INSTAL ADDRESSING
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Every time you turn the unit on, it will show “
BT-W12L10
” on the display and move all the motors to their
‘home’ position and you may hear some noises for about 20 seconds. After that the unit will be ready to
receive DMX signal or run the built-in programs.
YOU CAN OPERATE THE UNIT IN THREE WAYS:
By master/slave built-in preprogram function
By CA-8 easy controller
By RF8, this unit is now replaced by the new RF/DMX CONVERTER (press for more information)
By universal DMX controller (1MSL, 4MSL, 9CH, 12CH, 16CH and 28CH DMX mode)
BY MASTER/SLAVE BUILT-IN PREPROGRAM FUNCTION:
Select this function when you want an instant show. By linking the units in master/slave connection, the
first unit will control the other units to give an automatic, sound activated, synchronized light show. Its DMX
input will have nothing plugged into it, and its master-LED will be constantly on and sound-LED will flash to
the music.
Important! This function only works when the blackout mode in the menu of the master is set to
OFF, otherwise nothing will happen! Read more about this option in the “Main Menu” paragraph.
MASTER has 4 built-in shows:
You can select
show 1
,
show 2
,
show 3
or
show 4
directly in the
menu of the master.
SLAVES have 2 working options:
The other units are set to slave mode (slave-LED is constantly on).
In order to create a great light show you can introduce contrast movements (pan/tilt of slave is
inversed)
In the menu of the slave units you can go to option
“
Slave mode
” and select:
o
“Slave 1”
Normal slave:
slave works in sync with the master.
o
“Slave 2”
2 light show:
slave works in opposite with the master.
BY CA8 EASY CONTROLLER
When used in standalone or master/slave mode we strongly advise you to use the CA-8
“Wired easy controller” or RF/DMX Converter “Wireless easy
controller” that can also be used to control several different types of
other DMX projectors.
CA-8 wired remote:
Connect the controller to the jack input of
the first unit (master).
RF/DMX Converter:
the wireless remote has two parts:
RF-8T:
small RF-transmitter that can control up to 5
effects.
RF/DMX converter base:
small RF-receiver that converts
the commands from the RF-remote into a DMX-signal for
the BT-W12L10. See the installation manual of the receiver
for more information.