Briteq BT-W12L10 Wash, Operation Manual, Page: 11 / 21

ENGLISH OPERATION MANUAL
BRITEQ
®
9/18 BT-W12L10
Defaults
Used to choose between 2 sets of default settings, often used by rental companies:

PRO-defaults: basic settings for use on professional DMX-controllers.

AUTO-defaults: basic settings for easy master/slave use.

Press the MENU button
until the display shows “
Defaults
”.

Press the ENTER: to avoid accidental loss of your settings, the display shows “
Confirm?
”:

Use DOWN and UP buttons to select “
Yes
” or “
No
” and confirm by pressing the ENTER button.

When you select “
Yes
”, you have the choice between 2 options, each with their own settings:
Settings PRO def AUTO def
Channel mode 12ch 4MSL
Slave Mode Slave 1 Slave 1
Blackout Mode Freeze No
Sound State Off On
Sound Sense 90 90
Pan Inverse No No
Tilt Inverse No No
Backlight No Yes
Function Delay 3s 3s
Dimmer curve Mode1 Mode1
Starting from these defaults you can easily make your additional settings. The other setup parameters
remain unchanged.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Reset
Used to force a reset of the unit.

Press the MENU button until
“
Reset
” is blinking on the display.

Press the ENTER to reset all channels to their standard position.

To go back to the functions press the MENU button.
Please also check the chapter about the DMX-channel configuration of the unit to find out how you can force
a reset by DMX.
Offset Adjust
Used to adjust the home position:
If you’re not already in the setup menu, just press the
MENU button
shortly to enter the setup menu (“DMX
Ad
dress” is shown on the display)

Now press the ENTER button for at least 5 seconds to go
into offset mode.

Use DOWN and UP buttons to select the pan or the tilt

Press the ENTER button, the display starts blinking.

Use DOWN and UP buttons to adjust the home position

Press the ENTER button to confirm your setting
To go back to the functions without any change press the MENU button again.
If you want to go back to normal running mode: press the MENU button for about 2 seconds, the new offset
parameters for the home position is preserved in flash memory.