ENGLISH
USER MANUAL
BRITEQ
®
3/17
BT-ORBIT
•
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important:
Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
DESCRIPTION:
CONTROL PANEL:
1. POWER LED:
always on while the projector is connected to the mains.
2. DMX LED:
is lit while the unit receives a DMX-signal. Blinks while performing a software upgrade.
3. NAVIGATION BUTTONS:
MENU
To enter the setup menu or return to a previous function
▼
To go forward in the menu tree
▲
To go backward in the menu tree
ENTER
To confirm the selected function
Two
button shortcuts
make life easier for the installer:
•
Press
▲
&
▼
buttons together for 1,5sec:
Display turns over 180°
•
Press MENU + ENTER buttons for 3sec:
the projector resets.
4. DISPLAY
shows the various menus and the selected functions.
5. OMEGA CLAMP:
on the bottom you can insert the included “omega” quick clamp. Just turn the locking
system over 90° to secure the clamp. Always use a safety cable for extra security!
6. DMX IN/OUTPUTS:
used for DMX512 linking, you can use good quality balanced signal cables with 3pin
or 5pin XLR-connectors.
7. MAINS INPUT / OUTPUT:
with PowerCON
®
sockets, connect the supplied mains cable here, you can
daisy chain several units, up to max 16A. Input and output are connected to each other without any fuse.
8. MAINS FUSE:
this fuse only protects the electronics of the projector.
9. M-DMX INPUT:
Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ
®
and you will get wireless DMX! Moreover you will be able
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
®
.
The separate
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)
Hint: Please check our website for special cable assemblies that contain both power (3x1.5mm² with Neutrik
PowerCON
®
) and balanced signal (XLR 3pin) in one cable, very convenient!
SETUP MENU:
•
Press the
MENU
button to enter the setup menu.
•
Use
▲
/
▼ buttons to browse the
submenu(s)
and/or select functions, change the value(s).
•
Always press the
ENTER
button to confirm.
•
To return to a previous menu, always use the MENU button.
Note 1:
After 60 seconds the display will automatically return to normal mode without any change.
Note 2:
The grey colored options in the setup menu are the default settings.
DMX Functions
This submenu contains all DMX-related settings.
•
Press the MENU button and select the
“DMX Functions”
submenu.