ENGLISH
USER MANUAL
BRITEQ
®
3/9
BT-NONAMOVE
OVERHEAD RIGGING
•
Important:
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•
Locate the fixture in a wellventilated spot, far away from any flammable materials
and/or liquids. The fixture must be fixed
at least 50cm
from surrounding walls.
•
The device should be installed out of reach of people and outside areas where
persons may walk by or be seated.
•
Before rigging make sure that the installation area can hold a minimum point
load of 10times the device’s weight.
•
Always use a certified safety cable (number 3 on the picture) that can hold 12
times the weight of the device when installing the unit. This secondary safety
attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may
not be considered!
•
Don’t cover any ventilation openings as this may result in overheating.
•
The operator has to make sure that the safety-relating and machine-technical
installations are approved by an expert before using them for the first time. The
installations should be inspected every year by a skilled person to be sure that
safety is still optimal.
A. Holes to fix the special omega brackets (included)
B. Hole to fix an optional safety cable
DESCRIPTION
1. QUICK LOCK:
with these 4 quick lock connectors the BT-NONABEAM can be installed very fast.
2.
PAN LOCK:
locks the PAN-movement every 45° during transport.
3.
TILT LOCK:
locks the TILT-movement every 45° during transport and installation of BT-NONABEAM.
→
IMPORTANT: ALWAYS UNLOCK PAN & TILT LOCKS BEFORE SWITCHING THE UNIT ON
←
4. DISPLAY:
shows the various menus and the selected functions. Thanks to a gravity sensor the display
rotates automatically in the right direction.
5. [MENU / ESC] button:
Press to enter the setup menu or jump to the higher menu level.
6. ROTARY ENCODER:
turn the wheel in both directions to browse the menu items. Press the wheel to
select an item.
