ENGLISH
OPERATION MANUAL
BRITEQ
®
3/66
BT-NODE28
DESCRIPTION
FRONT PANEL
POWER
LINK
MENU
ON
OFF
ETHERNET NODE / DMX PROCESSOR
ACTIVITY
1
2
3
4
(1) 3 Leds:
power on, link (network link up), activity (network activity)
(2) DISPLAY:
shows all relevant information, “OLED” technology with large view angle and high brightness.
(3) 4 navigation buttons:
[MENU],
▲/▼ and [ENTER]
(4) Power button:
used to switch the unit on/off
REAR PANEL
DMX 8
DMX 7
DMX 6
DMX 5
DMX 4
DMX3
DMX2
DMX 1
ETH OUT
ETH IN
POWER
7
6
5
(5) Power input:
100V
– 240V IEC inlet with fuse holder
(6) 2x Neutrik RJ45 Ethercon
®
:
10/100Mbps network connection for Art-Net.
(7) 8x XLR female connectors:
XLR-3pin or XLR-5pin, depending on the version bought.
IMPORTANT NOTE
All XLR-
connectors are female, which is the standard “DMX-output” connector. So
if you configure a DMX-
port as a “DMX-input”: don’t forget to add an XLR
male/male-adapter. Adapters XLR-3pin male/male are separately available with
order code 1318. Adapter cables XLR-5pin male/male will be available soon.
ABOUT ART-NET
Art-Net is an Ethernet protocol based on the TCP/IP protocol suite. Its purpose is to allow transfer of large
amounts of DMX512 data over a wide area using standard networking technology.
Credits:
Art-
Net™ Designed by and Copyright Artistic Licence Holdings Ltd
