ENGLISH
OPERATION MANUAL
BRITEQ
®
8/66
BT-NODE28
[Display mode]
with this option you can choose between two different display formats:
Hexadecimal (0.0
–> F.F)
Decimal (1->256)
Attention:
Some Art-Net products use 0 to 255 for universe numbering, the BT-NODE28 numbers the
universes from 1 to 256. In such case you have to shift the universe one number: so 0 -->
1, …, 255 -->256.
5.SET [ID NO]
The Device ID is a numerical identifer to easy recognize the device. You can check the ID-number from the
Status menu.
Set the device ID by pressing [MENU] and
▲/▼ to select [Set ID NO]. Press [ENTER] to set the device ID.
Use
▲/▼ to change the device ID you want from 0 to 255, press [ENTER] to confirm.
6. SET LED BACKLIGHT
Set the LCD Backlight by pressing [MENU] and
▲/▼ to select [Set LCD Backlight]. Press [ENTER] to set the
LCD Backlight. Use
▲/▼ to select:
ON:
LCD is always lit.
OFF:
LCD turns black after 30seconds (only the LEDs on the front panel are active)
Press [ENTER] to confirm.
7. SET LED BRIGHTNESS
Set the display brightness by pressing [MENU] and
▲/▼ to select [Set LED Brightness] followed by
[ENTER]. Use
▲/▼ to adapt the LED Brightness between 0 and 10, followed by [ENTER] to confirm.
8. PRESETS
The BT-NODE28 has 2 different kinds of presets:
FACTORY PRESETS:
these are common presets, often used by most of the people. Further in this
manual we give a detailed explanation of these factory presets. Note that not all parameters of the
factory presets are editable: the table shows which parameters can be edited and which cannot.
FACTORY PRESETS
NON EDITABLE PARAMETERS
EDITABLE PARAMETERS
[ 8DMX to Art-Net ]
Dmx ports configuration
IP, Netmask, Frame rate, Display mode
[ Art-Net to 8DMX ]
Dmx ports configuration
IP, Netmask, Frame rate, Display mode
[ DMX Split 1>7 ]
Dmx ports configuration, IP, Netmask
[ DMX Split 2x1>3 ]
Dmx ports configuration, IP, Netmask
[ Art-Net Clone ]
Dmx ports configuration
IP, Netmask, Frame rate, Display mode
[ 8DMX to RJ45 ]
Dmx ports configuration, IP, Netmask
[ RJ45 to 8DMX ]
Dmx ports configuration, IP, Netmask
