ENGLISH
USER MANUAL
Briteq
®
3/13
BT-AKKULITE IP
•
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important:
Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
DESCRIPTION:
1.
Handle to easily carry the projector.
2.
Antenna for wireless connection
3.
IR sensor
4.
Mains input IP-Power (Seetronic) connector with rubber cap.
5.
[Power ON/OFF] button : push this button to turn the projector ON or OFF
6.
Hole to use the base as hanging bracket to fix the projector in truss, using a mounting hook.
7.
DMX Input connector XLR Male 3P with rubber cap.
8.
DMX Output connector XLR Female 3P with rubber cap.
9.
Projector base.
10.
Knob used to fasten the projector in a desired angle between 0° and 25°.
11.
Lens in front of RGBWA 10W LED
12.
Rubber foot.
13.
Valve.
14.
Display
15.
[Wireless DMX] Indicator : shows whether the wireless function is ON or OFF.
16.
[Wireless Mode] indicator : shows the status of the wireless DMX (Receiver or transmitter)
17.
Battery capacity indicator
18.
4 digit LCD display
19.
[Wireless ON/OFF] button : push this button to switch ON or OFF the wireless transmitter/receiver in the
projector.
20.
[MENU] button : push this button to select the desired topic in the menu
21.
[ENTER] button : push this button to confirm the selected setting
22.
▲ button : push this button to go up in the menu
23.
▼ button : push this button to go down in the menu
24.
[ID-Set] button : used to connect projector wireless to another projector. (see chapter : [SETUP MENU])