ENGLISH
OPERATION MANUAL
BRITEQ
®
5/9
BT-PROFILE HD
DISP
TIME
ON
Display backlight always on
10s
Turns off display backlight after 10s /
30s
/ 2min of inactivity
30s (default)
2min
FIXTURE HOURS
Hours of fixture use
VERSION
Software versions
INFO
RDM
UID
0x21220xxxxxxx
Check fixture's ID
LABEL
BT-PROFILE HD
Check fixture's LABEL
CCT
1800K
Preset color temperatures
2200K
2700K
3000K
3200K
4000K
4500K
5000K
5600K
6000K
6500K
7000K
8000K
10000K
PRESET
COLOR
COLOR 1
Preset color
(See Annex I for details)
COLOR 2
...
COLOR 48
All passwords of this product are <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>)
ELECTRICAL INSTALLATION
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Electrical installation for two or more units in DMX-mode:
•
The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected units.
•
Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+)
•
To prevent strange behavior of the light effects, due to interferences, you must use a
90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this simply
won’t work!
•
Make sure that all units are connected to the mains.
•
Each unit in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.
RDM FUNCTIONS / REMOTE SETUP
RDM
means “
R
emote
D
evice
M
anagement”. This projector works with a brief set of RDM-functions which
means that it can setup a bi-directional communication with an RDM-compatible DMX-controller. Some of
these functions are briefly explained below, others will be added in the future.
•
The DMX-
controller sends out a “discovery command”, all RDM devices respond and send their unique
device ID.
•
The DMX-controller asks each RDM device for some basic data so it knows which devices are connected.
The projector will respond:
•
Device name:
BT-PROFILE HD
•
Manufacturer:
Briteq
®
•
Category:
LED Dimmer
•
Firmware:
x.x.x.x
(firmware version of the projector)
