BriteMED MMS-21C, User Manual, Page: 21 / 55

MMS-21C User Manual
Page 21
2.1 Unpacking
To unpack the MMS-21C, please follow the steps below:
WARNING:
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the MMS-21C has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the monitor out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Pull the plastic cover off the MMS-21C.
Step 7: Make sure all the components listed in the packing list are present. Step 0: