britech TH115-AF-AG-10, Owner'S Manual

Page: 8 / 28

Operating Manual 400-115-050-EFS
6
ENG
LISH
n
Turn off power to the heating system at the service panel.
o
Loosen the captive screw and remove the thermostat faceplate from the
wallplate. (The screw remains captive and cannot be completely removed.)
p
Connect the thermostat to the power supply and to the load (see page 7).
q
Connect the floor sensor (see page 8).
r
If you wish to connect a remote control device, see page 8.
s
Install the wallplate to the electrical box using the provided screws.
t
Set the configuration switches on the back of the faceplate (see page 9).
u
Install the faceplate on the wall plate and tighten the captive screw .
v
Apply power to the heating system.
w
Test the ground fault protection (see page 19).
Installing the thermostat
Wallplate
Faceplate