08
05
www.britax.com.au
www.britax.com.au
1. ATTACHING & USING THE VIBRATION & SOUND UNIT (cont.)
2. TO REMOVE THE VIBRATION AND SOUND UNIT
D
Close the rocker into the folded position. (See section 11, page 10 )
Undo the buckles under the seat and pull the front seat cover up and over the unit.
Slightly lift the lever situated on the top of the unit to
release the Vibration and Sound unit and slide it out of
the base.
The Nature sound has 4 songs and total time takes around 9 minutes.
The Music sound has 10 songs and total time takes around 12 minutes.
A
Pull all the way down and secure the seat cover by fastening the buckles at the
back of the seat
D-1
D-2
1
2
3
1: Vibration
(Left: Off, Middle: Low vibration, Right: High vibration)
2: Repeat
(Press to repeat sound or musical tune)
3: Sound
(Left: Off, Middle: Nature sound, Right: Musical tune)
C
A
B
C
9. TO USE THE STATIC & ROCKING MODE
8. TO ATTACH THE TOY BAR
A
To attach the toy bar by pushing the ends into position of both sides of the rocker
as shown. To remove, simply pull it out.
A-2
NOTE: ENSURE THAT THE CIRCULAR END IS INSERTED INTO CIRCULAR
HOLE AND THE SQUARE END INTO SQUARE HOLE.
WARNING
: DO NOT USE THE TOY BAR AS A HANDLE FOR LIFTING THE ROCKER.
A-1
CIRCULAR END
SQUARE END
A
B
To set the rocker into a static position, rotate the rear bar to the position
as shown.
To set the rocker into rocking position, rotate the back bar to the position as
shown.
A
B
