Britax Safe-N-Sound UNITY Instructions For Installation & Use Download Page 40

Page: 40 / 41

Instructions for Installation & Use - Series No. 40/A/2013

NOTES

THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE ANCHORAGE STRAP
MAY FALL INTO THE SPLIT IN THE SEAT BACK (E.G. HATCHBACK OR STATION
WAGON).

The child should not sit forward facing until the child’s neck muscles are able to support
their head.

For top tether straps:

Straps may be damaged by unsecured cargo in a collision. Secure or remove
hazardous cargo before using this strap. Hatch-back or wagon: Do not use the
child restraint where the strap may fall into the seat back. Always attach and
remove slack.

VERY IMPORTANT

Only use this child restraint with the cover supplied
or a manufacturer-authorised replacement cover
with identical shoulder height markers.

Summary of Contents for Safe-N-Sound UNITY










































Search results

Summary of Contents for Safe-N-Sound UNITY

Reviews:

Related manuals for Safe-N-Sound UNITY

Brands by name

Popular brands

Britax Safe-N-Sound UNITY, Instructions For Installation & Use

Search results

Summary of Contents for Safe-N-Sound UNITY

Reviews:

Related manuals for Safe-N-Sound UNITY

Brands by name

Popular brands