Instructions for Installation & Use
Instructions for Installation & Use
84
85
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your
harness buckle, it may become sluggish. An indication of a sluggish
harness buckle is that you cannot hear a click when engaging the last
harness tongues. To restore the harness buckle to good working order it
needs to be cleaned as follows:
A. Remove the harness buckle from the restraint: From the underside of
the restraint pull each crotch strap 3-bar slide, turn the 3-bar slide on
its side and push back through the slot.
B. Place the harness buckle under warm (max. 40 degrees Celsius)
running water as shown below. Let the water run through the mouth
of the buckle for five minutes. Check the harness buckle is clean by
engaging the harness tongues and buckle several times until you
hear a click.
C. If you still cannot hear a strong audible click then repeat the cleaning
process several times.
D. Refit the harness buckle to the restraint ensuring the red button facing
outwards and the 3-bar slide is fed through the same slots.
If the Harness Buckle cannot be returned to its original working
condition then contact BRITAX Customer Service for assistance.
Body
Cover
3-bar
slide
BUCKLE OPERATION
To ensure the buckle remains operational the inside of the buckle must be kept free of liquids, sand, dirt,
fluff, food or similar substances. If the buckle is not operating or you do not hear a strong audible click when
the second tongue is inserted then the buckle needs to be washed or replaced. The buckle is fully engaged
when both tongues are inserted and a 'click' is heard. Contact Customer Service for assistance.
A
B
C
COVER (STYLE MAY VARY)
The restraint has a flame retardant cover which is removable
for cleaning. Cleaning instructions are on the care label
attached to the cover. If a fluffy cover is fitted, washing cover
prior to use should remove excess fluff.
Drying the padded insert will take additional time as the
comfort foam will absorb moisture. Before washing re-engage
any hook and loop on the cover and padded insert to prevent
fabric damage. The cover has been designed to protect your
child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food
or drink products may cause damage or marking to the cover.
Wash or clean immediately.
Do not pull sticky items from covers as the cover may be
damaged - soak in water and gently remove.
TO REMOVE COVER:
NOTE: There is no need to disconnect the shoulder harness
assembly straps from restraint.
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
C. Remove any accessories, padded insert, crotch pad and
shoulder pads (if supplied).
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
IMPORTANT:
Click
CARE & MAINTENANCE
CARE & MAINTENANCE
