Instructions for Installation & Use
Instructions for Installation & Use
56
57
ACCESSORIES
ACCESSORIES
PADDED INSERT - Style may vary
The Padded insert is only required for supporting
the smaller baby and must be removed once baby's
shoulders reach the upper shoulder height marker
to allow longer use of the Capsule.
A. Disengage the harness buckle and feed the
buckle out through buckle slot in the padded
insert.
B. Remove the insert pad from the shoulder
harness straps. Installation is the reverse of
removal procedure.
C. Discontinue use of the padded insert if it causes
discomfort or cramps the space available for
baby within the Baby Capsule.
HEAD PILLOW - Style may vary
The head pillow is only required for supporting the
smaller baby and can no longer be used once the
harness shoulder straps are in the top pair of slots.
The pillow is fitted to the Capsule by ties on the back
of the pillow being threaded through the next pair of
slots above the harness shoulder strap. Ensure the
ties are threaded through slots in the backrest of the
main moulding and tied together.
Head
Pillow
Slots for the
pillow ties
Shoulder
harness
SHOULDER PADS - Style may vary
The shoulder pads may require release by press studs. If fully fitted to the shoulder strap
then you will need to disconnect the shoulder strap as described on page 36.
CANOPY
Refer to page 46.
OTHER ACCESSORIES
Only use accessories designed and recommended by Britax Childcare Pty Ltd for this
product.
EXTRA BASE
An Extra Base is available as a separate purchase
for a second car. This allows the Capsule to be
easily and quickly switched between cars. The top
tether strap is supplied with the Base.