Consult the vehicle owner's handbook for location of anchorage fittings or anchorage points and the possible use of spacers.
Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If anchorage points cannot be found refer to car
manufacturer or local child restraint fitting station or traffic authority for optimum position of anchorage point and the use of
spacers.
PRE-INSTALLATION
IMPORTANT WARNING: THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF INCORRECT
FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS
CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE
OF THE RESTRAINT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS OR
VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in one way. Please refer to vehicle owner's
handbook or a child restraint fitting station for correct method.
Extension Strap distance to be measured.
Length 300mm (Use Safe-n-Sound part 0035 or equivalent)
Length 600mm (Use Safe-n-Sound part 0036 or equivalent)
Available from all major child restraint retailers.
The shaded areas of this diagram illustrate the possible locations of the anchor fitting. Within each shaded area is an anchor
fitting showing the correct way to install the fitting. Ensure the anchor fitting is aligned as illustrated unless stated otherwise in
the vehicle Owners handbook.
Distance to measure to
the anchor point
Correct engagement of attachment clip to
anchor fitting when attachment clip cover
is used.
Adjustable Upper
Anchorage Strap
Front of Vehicle
4
Summary of Contents for CONVERTIBLE CHILD RESTRAINT WITH AHR
Page 27: ...NOTES 27 ...