10
HOW TO INSTALL
A. Unhook hook & loop attachments & gently lift the cover, fully
extend out stabilising bar and gently push bar forward until a
click is heard. Stabilising Bar is now latched in place.
Note: Do not re-attach cover hook & loop until you have
installed seat belt.
B. Position restraint rearward facing in the chosen seating
position.
C. Fully lengthen seat belt and feed the seat belt between the
restraint cover and the restraint body through seat belt
slots in restraint. Place the seat belt under any comfort foam.
D. Engage seat belt buckle & tongue.
Note: Seat belt buckle and tongue must not rest between restraint cover and restraint. If seat belt buckle is
adjustable, adjust buckle as low as possible away from the restraint.
E. Re-attach hook and loop attachments.
Push bar
forward.
Click
Pull out
Stabilising
Bar.
Place the seat belt under any
foam padding that is supplied
with the restraint.
On the opposite
side to the seat belt
buckle, only pass
the lap portion of
the belt through the
lock-off and lock in
place.
On the car seat belt
buckle side, pass
both lap and sash
seat belt through the
lock-off and lock in
place
Hook and loop
attachments
Hook and loop
attachments
Rear facing seat
belt lock-off
(if fitted)
Do not use this slot for
baby use installation
FOR BABY USE (BIRTH TO 12kg)
Summary of Contents for CONVERTIBLE CHILD RESTRAINT WITH AHR
Page 27: ...NOTES 27 ...
