16
17
Click & Safe™ Snug Harness Indicator
Checklist
9
Check that the harness is buckled and secure.
9
Check that the harness is snug and you can not pinch excess.
2
Check for proper harness height.
3
Remove slack in the harness from around child’s upper thighs.
4
Remove slack in the harness between the HUGS™ chest pads
and buckle.
5
Pull the harness adjuster strap
until a click is heard.
The
Click & Safe™ indicator will
click when the harness is
within range of appropriate
snugness.
NOTE: If there is still slack in the harness, return to step 1 then pull
the adjuster strap again until another click indicates a snug harness.
It may be necessary to double check to confirm that the harness is
within range of appropriate snugness. Always confirm a snug fit by
attempting to pinch excess webbing.
ImpoRtANt:
See pages 55 – 57 for detailed instructions on
securing your child.
The Click & Safe™ is an audible indicator to help determine when
the child seat harness is within range of appropriate snugness.
The Click & Safe is a secondary feature. Parents should be aware
of what amount of snugness is appropriate in the harness. The
harness should have a comfortable but snug fit around the child. A
snug strap should not allow any slack. It lies in a relatively straight
line without sagging. It does not press on the child’s flesh or push
the child’s body into an unnatural position. You should not be able
to pinch excess.
The Click & Safe is designed to sense tension when the adjuster
strap is pulled. Ensure all slack has been removed from the child’s
hips and that the harness straps are correctly positioned at the
child’s shoulders so the Click & Safe will provide the most accurate
reading. Follow the steps below to tighten the harness.
To tighten the harness:
1
Remove any bulky clothing from your child before tightening
the harness.
2.5 cm
1 inch
Rear-Facing
Forward-Facing
Child Seat Functions
Child Seat Functions
