12
13
BOB
Gear
ALTERRAIN PRO User Guide
Setting the Parking Brake
The parking brake prevents the
stroller from moving while loading
and unloading. The parking brake
is not designed as a stopping brake.
Locked Position
To set the parking brake, press
down on the foot pedal – making
sure the locking pin fully engages
the locking disk.
NOTE:
To ensure the brake is set
properly, attempt to roll the stroller
forward and backward after setting
the brake. If the stroller will not
roll,the brake is set properly.
Unlocked Position
To release the parking brake, lift up
on the foot pedal with your foot until
the brake bar springs up into the
fully unlocked position.
Securing the Child in the Seat
1� Set Parking Brake
Rotate parking brake down into
locked position.
NOTE:
Rear wheels should
not rotate when parking brake
is set.
2� Place Child In Seat
Slip one shoulder strap over each
shoulder. Position buckle strap
between legs.
3� Fasten Shoulder Straps
Insert both shoulder strap
tongues into the buckle.
NOTE:
Buckle Strap should
be adjusted to have a snug fit.
4� Adjust Shoulder Strap Height
Adjust height of shoulder
strap to fit just above child
shoulder height.
5� Adjust Shoulder Straps
Open pads with hook and
loop fasteners. Slide buckle
up or down to adjust straps.
Seat harness should fit snug
and be comfortable.
6� Tighten Lap Strap
Adjust lap strap to fit snug and
be comfortable.
Using the Wrist Strap
Slip Loop of Strap Securely
Onto Wrist
The wrist strap is designed to
help prevent the stroller from
rolling away should you lose your
grip on the stroller. When using
the stroller, make sure the strap
is securely looped over your wrist.
Buckle Strap
Shoulder Strap
Buckle
Lap Strap
