background image

58

59

IN CASE OF ACCIDENT

IN CASE OF ACCIDENT

CRASH EXCHANGE

We would never want you to experience an accident, but unfortunately accidents do 
happen. 

If you experience an accident you may be eligible for a free replacement.

The Safe-n-Sound Crash Exchange Program is a voluntary program designed to 
ensure that our children are safe and that any seat that may have experienced a 
severe crash is taken out of the market.

There is no method of determining if the restraint has been damaged in a severe 
crash, so the restraint should be destroyed as the crash may reduce the child 
restraints ability to perform.

Since its inception in 2006, the Crash Exchange program has helped 100’s of 
families ensure that their children have new restraints and that the restraints are not 
sold second hand placing others at risk. 

Our Crash Exchange Terms and Application form are accessible on our website. 
Please visit 
www.britax.com.au for further information.

If your restraint has been involved in a severe crash, you should destroy the restraint 
even if no damage is obvious. Some insurance companies offer vehicle insurance 
which covers or partially covers the replacement of your child restraint. Contact your 
insurance company for further details. Your insurance company may require you 
to keep the child restraint for assessment, 

but do not use the child restraint after a 

severe crash. 

To assist you in making an accident insurance claim cut the following 

statement and include it with your claim.

All Safe-n-Sound child restraints are manufactured to Australian/New Zealand Standards 

AS/NZS1754-2010 which requires us to advise users of child restraints to "Destroy the 

entire restraint if it has been in use in a severe crash, even if no damage is obvious". The 

joint Australian/New Zealand Standards committee CS/85, advise that this statement 

applies whether a child was in the child restraint or not. We consider a "server crash" as 

being one where the main body structure of the vehicle is distorted.

There is no method of determining if the restraint has been damaged and we concur with 

the Australian/New Zealand Standards in recommending destruction of the child restraint.

This notice is to advise you of the requirements of the Australian/New Zealand Standards 

and our obligation in complying with the standards.

Please assist the owner of this restraint in their claim.

NOTICE TO INSURANCE COMPANY CHILD 

RESTRAINT INVOLVED IN AN ACCIDENT

New Zealand Office

 

Britax Childcare NZ Limited.
Telephone: 0508 688 822

Britax Childcare Pty. Ltd.

(Incorporated in Victoria)
A.B.N 55 006 773 600

Head office and registered address:

99 Derby Road  Sunshine  Victoria  3020
PO Box 147  Sunshine  Victoria  3020
Telephone:  1300 303 330

www.britax.com.au

www.britax.co.nz

Summary of Contents for 40/A/2010
































Reviews: