Introduction
Introduction
Introduction
Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with
your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need and, if you need any further help, please
do not hesitate to give us a call on 0844 701 6273.
Installation
Installation
Installation
Installation
1. Identify all components are present prior to installation.
2. Fit the waste body (4) and foam washer (5) into the basin.
3. Fit the rubber washer (6) underneath the basin as shown in the diagram, then secure by tightening the backnut
(7).
Use a pure silicon sealant where necessary.
4. Fit the waste plate (3) to the waste body and secure
with the screw (2) provided.
5. Check all joints and connections for leaks.
Components
Components
Components
Components
1.
Plug and Chain Assembly
2.
Screw
3.
Waste Plate
4.
Waste Body
5.
Foam Washer
6.
Rubber Washer
7.
Backnut
1
2
3
4
5
6
7