Bristan QD 1/2 C, Installation Instructions & User Manual, Page: 3 / 16

Important Safety Information
• Please read these instructions thoroughly and retain for future use.
• All products manufactured and supplied by Bristan are safe provided they are
installed, used correctly and receive regular maintenance in accordance with these
instructions
•
If you are in any doubt about your ability to install this product safely
you must employ the services of an experienced qualified plumber.
• Remove all packaging and check the components for damage before
starting installation.
•
Before starting any installation please consider the following: Prior to
drilling into walls, check that there are no hidden electrical wires, cables or
water supply pipes. This can be checked with the aid of an electronic detector.
• If power tools are used do not forget
to:
- Wear eye protection
- Unplug equipment after
use
• This product must not be modified in any way as this will invalidate the guarantee.
• These fittings need to be installed in accordance with and meet the requirements of the
Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
General Specifications
Operating pressure range (bar) Min Max
Basin & Bath Taps 0.2 8.0
Small Basin Mixer 0.5 8.0
Eco Basin Mixer 0.5 8.0
Tall Basin Mixer 0.4 8.0
Bidet Mixer 0.5 8.0
Bath Filler 0.3 8.0
Bath Shower Mixer 0.5 8.0
Maximum static pressure – 10.0 bar
NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for
optimum performance.
Designed to comply with BS EN 200 for single taps/ combination taps for water
systems of type 1 and 2 general technical specifications and to be used within systems
designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65
°
C. A
stored water temperature of 60
°
C is considered sufficient to meet all nominal
requirements and will minimise the build up of lime scale in hard water areas.
03