manualshive.com logo in svg

Bristan CAP2 SHUAR C, Installation Instructions And User Manual, Page: 2 / 36

Share
Download
Bristan CAP2 SHUAR C Installation Instructions And User Manual Download Page 2

2

Contents

Thank you for choosing Bristan, the UK’s leading showers and taps expert. 

Your Bristan shower valve is a thermostatic mixer incorporating a wax capsule 

thermostat to ensure constant shower temperatures. These instructions are for your 

guidance to a safe and successful installation and should be left with the user.  

All products manufactured and supplied by Bristan are safe providing they are installed 

correctly and receive regular maintenance in accordance with these instructions.

Important Safety Information ............................................... 3

General Information ................................................................. 4

Product Features ...................................................................... 5

Installation Requirements .................................................... 6-11

Flow Regulators ................................................................... 9-10

Dimensions ............................................................................... 12

Specifications ........................................................................... 13

Pack Contents ...................................................................... 14-15

CAP2 SHUAR C .................................................................... 14
SOQ2 SHUAR C .................................................................... 15

Installation ........................................................................... 16-23 

Surface Mounted Shower Valve - First Fix ....................... 16

Surface Mounted Shower Valve - Second Fix ..................... 17

Recessed Shower Valve - First Fix ................................... 18-19

Recessed Shower Valve - Second Fix.................................. 20
Riser Rail.............................................................................. 21-23

Operation .............................................................................. 24

Commissioning ......................................................................... 25

Maintenance ............................................................................. 26-28

Map of Hard Water Regions in the UK ................................ 28

Troubleshooting ........................................................................ 29-30

Guarantee ................................................................................. 31-32

Service Policy ............................................................................ 32

Summary of Contents for CAP2 SHUAR C





































Reviews:

No comments