Bristan AR2 SHXMTFF Installation Instructions And User Manual Download Page 28

28

Bristan offers solid guarantees to provide 

you with complete peace of mind.

Taps and Mixers 

5 year parts and 1 year labour*.  

Gold, painted and special finishes  

3 years parts only.

All subject to proof of purchase.

Mixer Shower Valves 

5 year parts. 5 year labour* (subject 

to registration), or 1 year with proof of 

purchase.

Gold, painted and special finishes 3 years 

parts only.

Pumps and Power Showers 

2 year parts. 1 year labour* (subject to 

registration).

Electric Showers/Instantaneous Water 

Heaters

 

2 year parts. 1 year labour* (subject to 

registration).

Accessories 

5 year parts only. Includes bathrooms 

accessories, shower accessories (e.g. hoses, 

handsets and poles), wastes, WC levers and 

light pulls. Gold, painted and special finishes 

3 years parts only.

Sanitaryware

 

5 year parts only. Subject to proof of 

purchase.

Shower Enclosures and Shower Trays 

10 year parts (subject to registration), or 2 

years with proof of purchase. 1 year labour* 

(subject to registration), or 1 year with proof 

of purchase.

Heated Towel Rails 

5 year parts only. Gold, painted and special 

finishes 3 years parts only. All subject to 

proof of purchase.

Guarantee 

*Labour provided by an approved Bristan 

engineer. Guarantee only applies to products 

with a manufacturing fault. A deferred 

payment will be necessary in order to secure 

any visits by our engineers which will be 

charged if the problem is found not to be 

a manufacturing fault. If the fault is found 

to be down to a manufacturing error, the 

payment will be released and not charged.

This guarantee applies to products 

purchased within the United Kingdom or 

Republic of Ireland, but does not apply to 

products used commercially.

The guarantee is only available to original 

purchasers who have proof of purchase.

The installation must allow ready access to 

all products for the purpose of inspection, 

maintenance or replacement.

Any part found to be defective during the 

above guarantee period will be replaced 

without charge, providing that the product 

has been installed in accordance with the 

instructions, used as intended, and regularly 

serviced.

Servicing should be carried out at regular 

intervals of no more than 12 months and 

more frequently in hard water areas (heavy 

lime scale) areas.

In the unlikely event that any problems are 

encountered with the product’s performance 

on installation, you must obtain guidance/

authorisation from our Customer Service 

Department, and be able to supply proof and 

date of purchase, before any remedial action 

is taken.

The guarantee excludes general wear and 

tear and damage caused by accident, misuse 

or neglect, and does not cover the following:

Summary of Contents for AR2 SHXMTFF

































Reviews: