Composite Heating
Curing Blankets
You must read and understand this manual before
installing, operating, or servicing this product. Failure to
understand these instructions could result in an accident
causing serious injury or death.
Keep these instructions for future reference.
(SRL5, SR, SRV, FGH, SXH,
Custom Series)
Instruction Manual
English
Language
Page
English ................................................................................................................................................... 1
Spanish (Español) ............................................................................................................................... 13
French (Français) ................................................................................................................................ 25
German (Deutsch) ............................................................................................................................... 37
Italian (Italiano) .................................................................................................................................... 49
© BriskHeat
®
Corporation. All rights reserved
.
2
SRL5, SR, SRV, FGH, and SXH
Composite Curing Blankets
TABLE OF CONTENTS
Introduction ..................................................................................................................................... 2
Applications .................................................................................................................................... 2
Approvals ....................................................................................................................................... 2
Important Safety Instructions .......................................................................................................... 3
Heater Characteristics / Specifications ........................................................................................... 4
Installation Instructions ................................................................................................................... 5
Connecting Your Heater to an ACR
®
Hot Bonder, Temperature Controller, or Power Source ...... 7
Emergency procedures .................................................................................................................. 8
Maintenance Instructions................................................................................................................ 9
Troubleshooting Guide ................................................................................................................. 10
Warranty Information .................................................................................................................... 11
INTRODUCTION
Thank you for purchasing a BriskHeat
®
Composite Heat Curing Blanket . Your heater is designed
to work with an ACR
®
Hot Bonder or other control device with functionality, reliability, and safety
in mind. For additional information concerning this, or other BriskHeat
®
products, please contact
your local BriskHeat
®
distributor or contact us toll free (U.S. / Canada only) at 1-800-848-7673 or
614-294-3376.
APPLICATIONS
Ideal for composite repair and fabrication applications. Can be used on horizontal, vertical, flat,
and complex contoured surfaces without removing the damaged section.
Not for use in weathered or immersed conditions.
APPROVALS
2014 / 35 / EU (Low voltage directive)
IEC 60519-1:2015, 60519-2:2006
2011 / 65 / EU (RoHS 2 directive)
Approvals valid only when installed in accordance with all applicable instructions, codes,
and regulations.
SRL5, SR5 only
