User Manual
ATM100
Motion Sensor
w w w . b r i n n o . c o m
Package Contents
1. ATM100 Motion Sensor x1
2. Magnetic holder x1
3. Metal Lens ring x2 4. User manual
Specification
Dimension
Weight
Waterproof
Detect Distance
Detect Angle
56(W)x34(L)x23(D) mm
10 g
IP54
4m
90˚
User Manual
ATM100
w w w . b r i n n o . c o m
Parts of ATM100
1.
Magnetic Holder
2.
Motion Sensor
3.
Plug
1
2
3
Installation on TLC200
1.
Clean the Time Lapse
Camera
(TLC200)
lens
and lens ring, then
place the metal lens
ring included on the
camera lens ring.
2.
Attach your
Motion sensor
magnetic holder
to the Time Lapse
Camera
(TLC200)
lens ring, and
insert the plug
into Time Lapse
Camera
(TLC200)
Extension port.
e
3.
Turn on the Time Lapse Camera
(TLC200)
and the screen will display Motion mode.
Motion mode screen
4.
Press OK, go to the preview screen.
Preview screen
READY
5.
Press OK again for one second, until the
LCD panel turns off, and the Time Lapse
Camera
(TLC200)
is recording images.
Preview screen
READY
LCD turn off
Recording...
Hold
OK button
1 Sec.
During the recording period, the LCD panel will turn off
to save power.
When the SD card memory is full, the Time Lapse Camera
(TLC200) will
STOP RECORDING
. Please remember to replace
the SD card to continue recording.
Green LED light: indicates
image capture in process.
When the Green LED light flashes, the Motion
Sensor (ATM100) is activated and the Time Lapse
Camera (TLC200) is capturing photos.
Red LED light: Memory is
full or Battery is empty.
