background image

Brinno Incorporated’s BirdWatchCam User Manual

User Man

ual

The BirdWatchCam targets and photographs birds 
within a 9 inch wide X 12 inch high area from all 
three pre-set distances.  Both the Passive Infra Red 
Motion Detection System and the Camera Optical 
System are set to work within this targeted area.   
This gives you those beautiful close up photos 
regardless of which distance you choose.

***(Please note that the laser pointer is soley 
intended for targeting the camera.  It is NOT 
intended for any other use, and could be harmful 
if pointed at another person.  Please see warning 
label on camera.)

Once you have your BirdWatchCam at the proper 
distance, and pre-targeted you are ready to mount 
it on your prefered surface.

The mounting unit will detach from the camera 
itself if you choose to mount the BWC on a tripod 
you will need to remove the mounting unit.

To  remove  the  mounting  unit  simply  grip  the 
camera firmly in one hand and pull down on the 
mounting unit until it slides free.  It is remounted by 
sliding it back into place.  

It is not necessary to remove the mounting unit to 
use the mounting methods noted below.

You  may  choose  to  use  the  mounting  straps  to 
wrap around a tree or pole to mount the camera.  

You may use the screwnail holes in the mounting 
unit to hang the camera.  

You may use the suction cups to adhere to a clean 
flat surface.  ( we recommend using one of the 
straps as a safety line when using the suction cups )

12. 

13. 

14. 

15. 

16. 

17. 

18. 

19. 

Once you have the BirdWatchCam mounted it can 
be adjusted by releasing the locking mechanism 
on the mounting unit by turning the friction lock 
counterclockwise and swiveling it left or right and 
up or down while holding the laser pointer button 
down.  

Once positioned correctly, simply lock it into 
position by turning the friction lock clockwise.

We strongly suggest taking a series of test photos 
to ensure that the BirdWatchCam is set up and 
targeted properly.

Now you have the BirdWatchCam mounted where 
you want it and its time to take pictures.

20.

21.

22.

23.

User manual0708.indd   5

2008/7/11   2:57:29 PM

Summary of Contents for BirdWatchCam









Reviews: