User Man
ual
1. Remove the BirdWatchCam from the package
2. Check to make sure that all the contents are
included.
3. Open up the BirdWatchCam by placing it suction
cup side down on a flat surface and lifting up
firmly on the door latch where it says “PULL”.
4. Insert the 4 AA batteries included in the package
following the polarity markings ( + - ) inside the
camera
5. Insert SD card into the BirdWatchCam (2GB SD
card included in package).
6. Close the BirdWatchCam.
How to set up your Brinno BirdWatchCam
7. Now you are ready to begin the BirdWatchCam
mounting process.
8. The three pre-set distances, 1.5 Meters, 2 Meters and
3 Meters are clearly marked on the measuring tape
included in the package.
9. Once you have decided on the mounting distance
from your bird feeder, use the measuring tape to
locate your BirdWatchCam correctly.
10. Once you have chosen your mounting distance
simply adjust the focus distance by turning the lens
to the matching setting, 1.5 M, 2M, 3M.
11. Now you want to pre-target the BirdWatchCam.
Press the laser pointer button on the top of the
BirdWatchCam and aim it at the mid point of the
feeder or area you want to take photos of.
(READ WARNING
BEFORE USING)
Mounting hole
Mounting Unit
Friction Lock
Door Latch
Suction cup
Laser Pointer
Optical lens
Motion Sensor
Power Button
User manual0708.indd 4
2008/7/11 2:57:28 PM
Summary of Contents for BirdWatchCam
Page 1: ...User Manual User Manual ...
Page 2: ...User Manual ...
