==================================================================================================
PROBLEM
CAUSE/CONDITION
REMEDY
Slow
Ground
Entry
1. Improper crank
adjustment.
2. Badly worn plow share.
3. Ground extremely dry and
hard due to lack of moisture.
4. Hitch downward movement
restricted by mower
adjustment.
1. Refer to depth adjustment and turn the crank
cLOcKWISE 1 or 2 turns at a time.
2. Replace with a new share.
3. Add extra weight to tractor or wait until soil conditions
are suitable.
4. Adjust for shortest cut height.
Plow Cutting
Too Wide
1. Improper tracking
adjustment.
1. See tracking adjustment on page 15.
Tracking
Issues
1. Plow Tracks to the
left or Leaves a ragged wall.
1.
See "Tracking Adjustment"
section
, on page 15.
Plow Bottom
Won't Polish
1. New or rusted
bottom.
1. clean bottom frequently during use until polish is obtained by:
- Clean bottom with a rag soaked in turpentine or mineral spirits.
- Old brick or pumice may also be used to polish bottom.
- Rub with a rag soaked in oil and dipped in sand.
Uneven
Plowing
Depth
1. Extreme variations in soil
texture and/or moisture.
2. Plow rides up in harder, dry
soil, runs shallow.
3. Plow goes too deep.
1. See plowing tips. Soil too wet or dry.
2. Reduce tractor speed in hard spots. Check depth adjustment.
3. Check depth adjustment, turn counter-clockwise.
MAINTENANCE
TROUBLESHOOTING
(Plowing difficulties and remedies).
USE AND CARE
-
CONDITION:
The moldboard should
(after initial scouring) be kept in a
smooth, polished condition. Fine sandpaper, steel wool,
kerosene, naphtha, etc. may be used to restore the finish
on a rusty moldboard.
-
SHARPENING:
The coulter blade edge should be
relatively sharp. If sharpening is necessary, use a flat file.
-
COULTER HUB BEARING:
Every 4 hours lubricate the
coulter hub bearing surface through the grease fitting.
NOTE:
When lubricating bearing, it is recommended that
you use multipurpose grease.
-
PREVENT RUST:
For smooth operation and to prohibit
the formation of rust on the crank, keep a light coating of
oil on threads.
qUALITY CONTINUES
WITH qUALITY SERVICE
If you have installation questions, are missing parts
or need replacement parts, don’t go back to the store!
Please find your product serial number and model number,
then contact our customer Service department:
SERVICE
In North America and canada call
Toll-Free:
877-728-8224
chat online:
www.brinly.com
Email:
17
L-1043-3-B
English Manual
