![Brinly PP-510 Owner'S Manual Download Page 13](http://html.mh-extra.com/html/brinly/pp-510/pp-510_owners-manual_2812981013.webp)
==================================================================================================
USE AND CARE
MODEL:
P P - 5 1 0 P L O W
U S E & C A R E
S E C T I O N
NOTE:
During normal plowing, the right side Tractor Wheels will be riding
in the previously plowed furrow. (A furrow is the cut area your plow makes
while turning the soil).
An initial setting for your plow is required to cut
the first furrow on level ground.
PRE-ADJUSTMENT
SPECIFICATIONS
Working Width . . . . . . . . . 8" - 10"
Primary material
. . . . . . . . . Steel
compatability . . . . . . . All garden
tractor models*
Settings / Speed . . . . . . 3rd Gear
Full Throttle
Steady Pace
DIMENSIONS
Length . . . . . . . . . . . . . . . . . . . 42"
Width . . . . . . . . . . . . . . . . . . . 12"
Height . . . . . . . . . . . . . . . . . . . 23"
*Must be equipped with a sleeve
hitch (purchased through tractor
manufacturer).
PRE-SETS FOR APPROxIMATELY
5"-6" PLOWING DEPTH:
1.
Remove stabilizer bolts and nuts from Sleeve Hitch.
(
The plow must be free to move side to side on hitch).
2.
Lower your tractor lift handle and lock in the Lowered position.
(You may need to lower the "attachment depth control" on your
tractor to do this).
3.
Mount the Plow to the Sleeve Hitch with the Hitch Pin furnished
with the Hitch.
(Refer to Assembly Step #3 on pg 9 of this manual to
select the proper mounting hole).
4.
Adjust lift spring tension on hitch as required.
(See hitch manual for instructions).
5.
Adjust the depth crank of plow
until point of plow share is on the
ground and the rear of Plow landside is approximately 1" off the ground.
Refer to figure 1 on pg 14.
NOTE:
The Plow will appear to be angled to
the left. This will allow the plow to run level when the right hand tractor
wheels are in the plowed furrow.
WARNING -
The "Attachment Clutch" switch on the dash of Tractor (device that engages tractor mower)
needs to be ENGAGEd at all times while operating the tractor. This actuates the Operator Sensing device in
the tractor seat - Tractor Engine will stop in case you dismount or fall off tractor. Failure to actuate this device
can cause personal injury or damage to your tractor and property if you were to fall off. SWITCH mUST bE
dISENGAGEd IN ORdER TO RESTART ENGINE.
13
L-1043-3-B
English Manual