9
L-1821-L
English Manual
================================================================================================
ASSEMBLY
Starred edge of the waSher needS to be facing the Spring.
3
18
Begin to slide the 3/8 x 3-3/4 in. bolt (3)
through the drawbar (18).
Between the drawbar and the latch spring (9),
add one 3/8 in. keps nut (10) to the bolt (3) as illustrated.
NOTE: Foot pedal can be adjusted slightly while installing
bolt (3). This will help to align the bolt with the hole on the
other side of the drawbar.
9
10
8
10
Assembly Step 4-B
Hardware Panel 3
Starred edge of the waSher needS to be facing the Spring.
10
3
9
8
18
10
Assembly Step 4-C
Hardware Panel 3
Continue to run the bolt (3) through
the latch spring (9), and foot pedal (8).
Between the latch spring (9) and drawbar, add one
3/8 in. keps nut (10) to the bolt (3) as illustrated. Finally, run the
end of the bolt (3) through the other side of the drawbar (18).
NOTE: Foot pedal can be adjusted slightly while installing bolt (3). This will
help to align the bolt with the hole on the other side of the drawbar.