8
L-1821-L
English Manual
================================================================================================
ASSEMBLY
x8
26
6
Assembly Step 2
4
6
5
17
11
6
+
26
4
+
5
+
6
Install Axle Support
1. Position the Axle Support (
11
)
over slotted holes over the
Longitudinal Supports (
24
) and
bed (
17
).
2. Secure in place from inside the
cart bed (17) with one 5/16 x 1 1/4" Round
Head Screw (
26
), and 5/16" Flat Washer (
6
).
From the outside, add another 5/16" Flat Washer
(
6
), one 5/16" Lock Washer (
5
) and one 5/16" Hex
Nut (
4
), as shown. Assemble finger tight until all
screws are installed.
3. Tighten all nuts from Steps 1 and 2.
Hardware Panel 2
Assembly Step 3
1. Align the cart foot pedal (8) through slot in drawbar (18) with the notch in
the foot pedal oriented towards the raised tongue on the drawbar. See
illustration.
2. While holding the foot pedal (8) in place, flip the drawbar (18) over.
8
18
9
18
8
Assembly Step 4-A
Squeeze in the latch spring (9) arms and slide in place, as illustrated.
ALIGNMENT NOTES:
•
The widest portion
of the spring will straddle
the larger of the two
drawbar (18) openings.
•
The loop of the spring is
slightly raised away from the
drawbar and aligns with base
of the foot pedal (8).
•
Narrow end of
the spring rests
against the
drawbar (18).