1020142-A
12
English Manual
================================================================================================
TIP: SPOTTING
THE DIFFERENCES
BETWEEN TUBES
THESE HAVE ONE SHORT END
Plate = 1-1/8” from the end of the tube. The
short ends need to face out, closest to the
side plates (2).
9
End Tube Assemblies
THE ENDS ARE IDENTICAL
LENGTHS
Plates = 2-3/4” from both ends of the tubes.
8
Center Tube Assembly
VS
ASSEMBLY
Step 6
34
34
34
34
34
34
26
26
26
26
26
26
7
7
9
9
8
2
2
10
START WITH:
10
+
26
Add a
Machinery Bushing
to the Axle.
2
Insert the Axle Assembly (
10
) through the right
side plate as illustrated above.
CONTINUE ADDING TO THE AXLE IN THE FOLLOWING ORDER:
9
End Tube Assembly
-
Face short end toward the side plate
(
2
).
26
Machinery Bushing
7
Spacer
26
Machinery Bushing
8
Center Tube Assembly
26
Machinery Bushing
7
Spacer
26
Machinery Bushing
9
End Tube Assembly
-
Face short end toward the side plate
(
2
).
26
NOTE:
One (or more) Machinery Bushings (
26
) can be added to the
end of the axle, on the outside edge (as needed) to eliminate any side
play in the axle assembly.