13
**Exterior circumference of washers can vary.
These dimensions are a measurement of the
internal diameter of the washer.
0”
2”
4”
1”
3”
5”
1/2”
**
3/8”
**
5/16”
**
1/4”
**
ASSEMBLY
================================================================================================
1018348-C
Joining the Push Arm to the Blade
5. Mount trip spring by treading 3/8” x 2 1/2” full
threaded bolt (
46
) and 3/8” washer (
34
) so that the
head of the bolt is captured
inside of spring (
15
).
6. Hook the opposite
end of the spring
(
15
) through the
pivot weldment (
8
).
7. Insert the bolt through
the trip bracket (
18
) that
was installed on Assembly
Step 12.
Tread and tighten the 3/8”
toothed nut (
44
) until the
spring is touching the
bracket.
Assembly Step 13
18
46
15
44
34
8
9/16” Wrench & Socket
8. Tighten the nut and bolt that were added
on Assembly Step 12.
Joining the Push Arm to the Blade
4. Attach spring trip bracket (
18
) using:
-
x
1 Hex Head Bolt (
29
)
– 3/8” x 1 1/4”
-
x
1 Washer, Flat (
34
) – 3/8”
-
x
1 Nylon Lock Nut (
41
) – 3/8”
DO NOT
tighten completely (yet).
18
41
34
29
9/16” Wrench & Socket
Assembly Step 12