25
Step 10
Attach side burner to right side of
cart frame assembly. Insert two
M6 X 12mm bolts (black) into both
right legs halfway. Place side
burner over bolts and slide toward
back of grill, then tighten securely.
Fasten side burner front panel to
grill body with one M6 X 12mm bolt
(black).
Step 11
Attach hose heat shield using two
#8 self-tapping screws.
Step 12
Loosen the two M4 bolts with
washers from the bottom of the
burner assembly bracket. This will
allow the burner to move freely
while performing Step 13.
Step 13
Remove two M4 bolts and washers
from the side burner valve. Insert
the side burner valve assembly
through the hole in the side burner
front panel, seat the valve nozzle
into the burner venturi. Hold in
place while you perform Step 14.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in this
manual for proper
procedures.
Side Burner
Valve
Burner Venturi
Valve
Nozzle
Heat Shield
Burner Venturi
Support Bracket
Summary of Contents for Southgate
Page 30: ...29 Southgate 8445 N Assembled ...
