background image

Tips to Avoid Damage to Your

L.E.D./Halogen Spotlight

Never attempt to wipe or clean the inner reflective surface of the
reflector. Touching or wiping the surface will damage it permanently.

The lens is made of tempered glass. Avoid dropping or sharp impact on
spotlight to prevent damage.

Do not allow hot lens to come in contact with water or materials subject
to heat damage.

The spotlight is weather resistant. It is not waterproof. Do not use the
spotlight under water or store outdoors.

Use only Brinkmann halogen bulb that is designed for your
L.E.D./Halogen spotlight. Use of any other bulb may result in poor
performance and may damage your spotlight.

After months of use, cigarette lighters can build up corrosion that may
prevent the DC lighter plug from making good contact. It may be
necessary to clean the inside of your cigarette lighter receptacle with a
fine emery cloth. Before cleaning receptacle, remove the fuse to prevent
it from shorting out.

Do not allow the battery to become fully discharged before recharging,
as this will shorten the battery life.

During extended periods of non-use, recharge the spotlight every 
2 months.

7

INSTR_800-2232-0_LED_Halo.qxd  9/26/05  10:53 AM  Page 8

Summary of Contents for LED Halogen rechargeable









Reviews: