7
CONNECTING HOSE AND REGULATOR:
1. Make sure control knobs are in the “
” (OFF) position.
2. The regulator rubber hose and regulator are properly and securely
connected.
3. The regulator handle is in the “OFF” position. (Figure 2).
4. Remove the seal cap from the automatic valve on the gas cylinder.
5. Place regulator onto the automatic valve on the gas cylinder.
Push downward firmly (Figure 1).
6. You should hear a “click” sound when the regulator is securely latched.
7. Leak check all fittings before lighting your grill. See section on “Leak
Testing” in this manual.
OPERATING REGULATOR:
1. To turn regulator ON, turn the regulator valve counterclockwise into the
“ON” position (Figure 3).
CAUTION: If you are unable to turn the regulator handle to the “ON”
position, your regulator is not properly connected. Do
not force the handle to open. Remove the regulator and
repeat “Connect Gas Cylinder” section.
2. To turn regulator OFF, turn the regulator valve clockwise into the
“OFF” position (Figure 2).
DISCONNECT HOSE & REGULATOR:
1. Make sure control knobs are “
” (OFF) position.
2. Turn the regulator handle in the “OFF” position. (Figure 2).
3. Pull the regulator clamp and regulator upwards (Figure 4).
Figure 1
Figure 3
On
Position
Figure 2
Off Position
CAUTION: Never attempt to connect or disconnect regulator when the regulator valve is not
in the “OFF” position.
Figure 4
LEAK TESTING:
• Never use your grill without leak testing all gas connections, hoses and propane tank. Follow
the section on “Leak Testing” in this manual for proper procedures.
WARNING
Summary of Contents for 810-3420-A
Page 30: ...29 Brinkmann 3420 Assembled...
Page 31: ......
