810-1750-S ROTISSERIE BURNER
CAUTION:
Only use specified natural gas
orifice for your grill.
Note:
It is helpful to keep the screws with
the components as they are removed
for ease of reassembly.
Step 13
Remove the three screws of panel from front
side of grill to gain access to the rotisserie
LP brass orifice on back side of grill. Set aside
for later use.
Step 14
Using an adjustable wrench to hold the gas line
secure, use the open end wrench provided to
loosen the gas line retaining nut. With the
rotisserie gas supply line detached from the
housing, use two wrenches to remove the LP
brass orifice from the gas supply line. Replace
the LP gas brass orifice with the proper natural
gas orifice. (1.35 mm RED)
Note:
Bending the hose could damage the
supply line.
Step 15
Reattach gas supply line to the rotisserie
housing by securing with the retaining nut
removed in Step 14.
Note:
Leave the back panel off until the end
of conversion and all gas leak testing
has been completed.
Step 16
Re-install rotisserie cover using the bolts that
were set aside in Step 13.
1.35 mm
Existing Rotisserie LP
Gas Orifice
Retaining Nut
Brass Orifice
Replacement Rotisserie
Natural Gas Orifice
(identified by number)
Rotisserie Burner 1.35 mm (RED)
12
Cover Bolts