Renovent Excellent
29
Electric diagrams
Chapter 10
10.1 Basic diagram
A = Multiple switch
B = Preheater
C = Outdoor temperature sensor
D = Control board
E = Supply fan
F = Extract fan
G = Control panel
H = Indoor temperature sensor
J = Service connector
K = Valve motor bypass
L = Renovent Plus version
N = Not applicable
O = E bus connector (polarity sensitive) or OpenTherm,
application depending on parameter setting 8
P = Postheater (Plus version)
Q = Output 0-10 V(Plus version)
R = Sensor postheater or outdoor sensor geo heat exchanger
(Plus version)
S = 24 volt connector (Plus version)
T = Input 0-10 V (or make contact) (Plus version)
U = Make contact or input 0-10 V)(Plus version)
Z = RH-sensor (option) (Plus version)
230VAC 50Hz
2"("32"Xs
24V/ 4,5 VA
2"/"32"Xq
