background image

In case of emergency

In case of an emergency, for example a
fire or a spill of hazardous gas nearby:

close all windows and doors (as
advised by the authorities). 

turn off your HRV system by the
on/off switch or if not fitted by
disconnecting from the mains
supply.

there is enough fresh air in your
house for a time.

always follow the instructions of the
authorities in these emergencies.

as soon as it is safe to do so, restart
the HRV system.

How can I ventilate intelligently?

Intelligent ventilation means it is
operating 24/7. Secondly it needs to
ventilate the correct amount - this
depends on the presence of people and
their activity.

You can imagine that during the use of
the bathroom or kitchen, extra
ventilation may be required.

The BRINK HRV has therefore 4
ventilation settings on the 4-way
switch.

not present

(holiday or
absence setting)

2

present

(everyday
setting)

3

boost

Can I open a window?

Even with a balanced HRV system you
can open a window if you want.

However, in a well balanced ventilated
dwelling this is not necessary.

In the summertime, if the indoor
temperature is becoming too high,
opening a window can provide
additional ventilation with cooler air.

However, if you open the window in the
heating season, extra energy is wasted
in heating up the incoming cold air.

Remember the incoming air through
the ventilation system is filtered and,
providing the filters are regularly
cleaned, this air will be of a better
quality than the air coming in through
an open window.

Condensate drain

The appliance is fitted with a
condensation drain with a water trap
somewhere below the unit. 

If you get a drain smell near the unit it
is possible that the trap has dried out
through evaporation.

This can be simply resolved by refilling
the trap with water.

1

background 

The ventilation speeds can be set according

to requirements.

Default factory settings are as follows;

1 2 3 

Settings (m3 per hour):

RE180 

50 75 100 150

RE300 

50  100 150 225

RE400 

50  100 200 300

HRV unit:

For further details on settings please refer to your Brink HRV installation manual. If you need a copy please email CVC Direct: [email protected]

Summary of Contents for HRV Balanced








Reviews: