Step 4
When the Wireless Controller with humidity sensor has been fitted on
the wall the USB transceiver can be placed in the USB port of the
appliance which must be connected with the Wireless Controller with
humidity sensor. To connect the USB transceiver with HRU appliance
see
®
Connecting with USB Tranceiver (Pairing)
Connecting additional RF sensor with USB Tranceiver (Pairing)
16 .
3.2 Remove Wireless Controller with humidity sensor from wall bracket
For removing the Wireless Controller with humidity sensor from the
wall bracket grasp the front of the Wireless Controller with humidity
sensor by edges and gently pull away from wall.
An example of a wireless controller is shown in this section, but other
wireless controllers/sensors can be removed from the wall bracket in
the same way.
3.3 Connecting the AC/DC converter (option)
Warning!
At all times disconnect the 230 V. power supply when connecting the AC/DC converter.
When using the optional AC/DC converter, the wall bracket must be attached to a electrical wall box (Ø 55 mm).
Connect the optional AC/DC converter (A) with the Wireless Controller with humidity sensor (B) conform the wiring
diagram.
The following actions should be performed to connect the optional 5V AC/DC converter:
Step 1
▪
Place the converter in the wall box.
▪
▪
The 230V power supply must be connected to the factory
▪
mounted gray connectors. Strip the wire over a length of
approx. 7 mm.
Step 2
▪
Screw the wall bracket on the wall box and feed the red
▪
and black wires including mounted green connector
through the square hole in the in the mounting plate.
▪
Take note!
▪
The up arrow on the wall bracket must point upwards!
Step 3
▪
After feed the red and black wire with the green
▪
connector through the frame connect this to the
connector on the back side of the Wireless Controller
with humidity sensor.
▪
Removal of the battery is not required but recommended.
▪
A.
AC/DC converter (230V~/5V=)
A.
B.
Wireless Controller with humidity
B.
sensor
X1 = Black
X2 = Red
X3 = Brown
X4 = Blue
Wireless Controller with humidity sensor 616880-B
