17
Note!
The scales on the cutting adjustment indicate the
approximate cutting height:
14 mm* = shortest cut
45 mm* = longest cut
*) Applies to the models RazorCut Premium 33
and RazorCut Premium 38.
Ensure that the cutting height marking arrows on
both sides indicate the same cutting height on
the scale. The cutting equipment may only be set
so deep that the lower blade cannot touch the
ground regardless of any unevenness present.
G
Once you have set the correct cutting height,
tighten the two lock nuts again
(8)
.
Safety information for mowing
G
Before each use, check the mower visually to
ensure that nuts, bolts and the cutting equip-
ment are not worn or damaged.
Do not use the equipment if safety devices
(safety covers) and/or if the cutting device is
damaged or worn.
Never disable safety devices.
G
Only use when visibility is suffi-
cient. Never use the equipment in
the rain or in damp, wet condi-
tions.
G
When mowing, wear sturdy shoes with non-
slip grip soles together with long trousers.
Attention! Rotating cutting equipment.
Danger of cutting from sharp blades.
G
Be careful! The rotating blade
roller
(10)
can cause serious
injuries.
Always keep the safety distance
between the user and blade roller
shown by the push bar.
Never place your hands or feet on
or under the cutting equipment.
The cutting equipment continues
to rotate after you stop mowing!
G
Check the area that you want to
mow beforehand to avoid damage
to the mower or to living beings
and objects. Stones, wood, wires
and other foreign bodies must be
removed. Objects that are caught
by the cutting equipment can be
flung out uncontrollably. Keep
bystanders away from the danger
zone.
G
If the cutting equipment or the mower hits an
obstacle or foreign body, you should check the
mower for damage.
G
Take extra care when mowing on embank-
ments and slopes:
– make sure you are on firm ground and
always mow across a slope.
– only push the equipment at walking pace.
– do not mow on excessively steep slopes.
–
Danger of stumbling!
Take special care
when moving backwards and when pulling
the appliance.
RZ_RazorCut_33_38:Text 20.01.2010 16:16 Uhr Seite 17
Summary of Contents for Razorcut Premium 33
