Brigmton BTM-3FLIP, Instruction Manual

Page: 14 / 20

While the phone charging the battery the battery icon flashes on the
screen. When charging is complete the full icon will be displayed on the
screen. The charging time is 2 to 3 hours.
1. Insert the charger into the wall outlet.
2. Connect the charger to the phone.
3. The battery symbol flashes. (If the battery is completely exhausted, you
may have to wait for a few minutes)
4. When charging is completed, remove the charger from the outlet, then
remove the phone charger.
ON OFF
On: In stop-off state, press and hold the ON / OFF button.
Off: With the phone on, press and hold the ON / OFF button to turn it off.
MEMORY CARD
The phone supports MicroSD cards. To insert the card:
1. Turn off the phone, remove the battery and / or other external power
supply.
2. Insert the card following the instructions. Lift the metal card holder
carefully and insert the MicroSD card.
3. If you need to remove the card, turn off the phone and repeat the
process.
MICRO USB CONNECTION wire
The phone is compatible with USB interface, you can connect your phone
to your computer via the USB data line to copy, move files between your
mobile phone, etc.
1. Connect the micro USB cable to the phone input.
2. Connect the other end of the USB cable to the computer USB port.
3. Select the desired mode.
BASICS – CALLS
STANDBY MODE
Once turned on, the phone will automatically choose the connection to the
main network. When the network operator logo appears on the screen,
you can dial or answer the phone.
TO MAKE A PHONE CALL
There are several ways to make a phone call: