4
Thermo Sensor Unit Appearance.
D1: Transmission Indication LED D2: Outdoor Temperature
D3: Wall Mount Hole D4: Channel Select Switch
D5: Battery Compartment D6:
°
C/
°
F” button
D7: “TX” button D8: Stand
D9: Temperature Sensor Probe and Plug
Set Up:
y
Insert batteries.
y
Use a pin to press the RESET (B12) button
Weather Forecast Function:
z
After Batteries inserted, or holding “WEATHER” button (B7) for 3 seconds, Weather Icon
(A11) blinks. Enter the current weather condition by pressing “
▲
“ (B8) or “
▼
“ (B9) buttons.
Press “WEATHER” button (B7) to confirm the setting. The weather forecast may not be
accurate if the current weather condition entered is not correct.
z
The current weather status should be entered again if the altitude of the weather station is
changed. ( Barometric pressure is lower at higher altitude location. Therefore, altitude change
will affect the weather forecast) The weather station will start the first forecast at 6 hours
after the current weather status is entered. The weather station will start the first forecast at 6
hours after the current weather status is entered
