3
Thermo Sensor Unit Appearance
D1: Outdoor Temperature D2: Transmission Indication LED
D3: Wall Mount Hole D4: “ºC/ºF” button
D5: “Channel Select Switch” D6: “TX” button
D7: Battery Compartment D8: Temperature Sensor Probe and Plug
Set Up:
y
Insert batteries.
y
Use a pin to press the RESET (B10) button
Starting up the Main Unit:
y
The clock automatically starts scanning the RF 433 MHz signal to register new
Thermo Sensor Unit after new batteries inserted, “--.-” flashes on the outdoor
temperature. After registered new channels or press “CHANNEL” button (B3),
scanning stops. All buttons will not function when scanning for Thermo sensor’s
signal unless they are well received or stopped manually.
Time Setting:
z
Hold “MODE” button (B5) for 3 seconds to enter Clock/Calendar setting mode.
z
Press “+” (B8) or “-” (B7) buttons to adjust the setting and press “MODE” button
