11
Revision 1.0
05/2022
B1051EN
A
RAIL
B RAIL
COMMON
COMMON
ISOLATED
B RAIL
COMMON
B
RAIL
L
N
RED
BLACK
YELLOW
WHITE
GREEN
BLUE
FORMULA SELECT
The BrightLogic laundry Formula Select module (optional) allows remote selection of up to
20 different wash programs, program names can be displayed by uploading via the computer
program.
The Formula Select module can also be used to prime and stop the pumps.
The desired program must be selected, using the UP and DOWN keys on the module and
pressing enter, before beginning the wash cycle.
Resetting options
There are four options available to reset the formula select:
Reset Formula to Program 01 - (default setting)
Reset Formula to Program 00 - (blank program)
Reset Formula to Program 02 - (set to any program number)
Reset Formula to Previous program - (resets to the previous program)
The unit can be manually reset by pressing the up and down keys together for 1 second.
Without a Formula Select module
If there is no formula select installed then the programs can still be selected from the unit itself.
From the default screen press the
PROGRAM
button to toggle the correct program.
FORMULA SELECT - INSTALLATION
Fit the module to a suitable surface, in an accessible area, using the self-adhesive Velcro
provided.
Before fitting, please ensure that the power to the unit has been isolated.
Open the lid of the main enclosure.
Pass the cable through the gland situated on the bottom of the unit and run it to the vicinity of the
Formula Select connection socket on the board (bottom right).
Note:
Screened cable should be used.
Fit the green connector with the coloured wire in the order shown above. Plug the connector into
the correct socket and tighten the gland to grip the cable.
REMOVE links LK3 & LK4