7
Using the + and - keys, select the Channel that you wish
to program.
Using the + and - keys, select the Timing entry that you
wish to program.
PROGRAM MODE
Program channel
Channel 1
PROGRAM MODE
Program channel
Channel 1
Entry 1
Program channel, Clear timing entries and Set up system
options will require a PIN number
before allowing access.
Programming Timing Entries
(access code protected)
Program channel
PROGRAM MODE
Enter PIN number
0---
When selecting one of these options, the following screen
will be displayed.
Use the + and - key to enter your 4 digit access code and
press the ACCEPT key to move on.
During programming, the access code will only be
required to be entered once, until Program Mode is exited.
This is done by pressing the ESCAPE key.
Mode; TIMED (Continuous);
CYCLIC (Pulsed)
Channel/Entry Number
Operational Days
Start time; HRS:MIN
Run duration; HRS:MIN:SEC
ON=00:00:00/00:00:00
START M------ 00:00
Edit 1/1 CYCLIC
DURATION 00:00:00
CYCLIC mode only
CYCLE ON time;
HRS:MIN:SEC
CYCLE OFF time;
HRS:MIN:SEC
Timing entry programming screens
Summary of Contents for Bright-time
Page 1: ...BRIGHTFLOW CHEMICAL DISPENSING SYSTEMS B926 v1 0 4 CHANNEL REAL TIME CLOCK...
Page 13: ...13...
Page 14: ...14...
Page 15: ...15...
