Power led
It lights when power is on
Data transmission
led
Led blinks slowly when it is building connection. Led blinks fast
when it is successfully connected and transmitting data
Connection led
It lights when wireless signal is well connected
Power input
Connect with DC5V/
3
A power adapter
Reset
Press reset button to restart the device
HDMI input
Connect with HDMI source device
IR
OUT
Connect with IR blaster extension cable. Please put the IR blaster
close to source device to best transmit the IR signal from receiver
Antenna
Launch wireless signal
2
. HDMI
E
xtender RX receiver
Power led
It lights when power is on
Data transmission
led
Led blinks slowly when it is building connection. Led blinks fast
when it is successfully connected and transmitting data
Connection led
It lights when wireless signal is well connected
Power input
Connect with DC5V/
3
A power adapter
Reset
Press reset button to restart the device
HDMI output
Connect with HDMI display device
IR
IN
Connect with IR receiver extension cable. Please make sure the
remote control is within the required range of IR receiver
Antenna
Receive wireless signal
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repair the device or open the enclosure without professional
person guidance to avoid electronic shock.
5
. Make sure good ventilation openings to avoid product overheating
damage
.
6
. Shut off power and make sure environment is safe before installation.
7
.
Do not plug-in/out the network cables and IR cables when it is in
using to
avoid cables damage.
8
.
Use DC5V only. Make sure the specification matched if using 3
party DC adapters.
HDMI Extender TX
sender*1pcs
HDMI Extender RX
receiver*1pcs
DC5V/
3
A power
adapter*2pcs
IR blaster extension
cable*1pcs
1
. HDMI Extender TX sender
•
Important safety notice
rd
This transmitter extends HDMI signal wirelessly from source device
to display device up to 200meters with the advanced application of
HDbitT transport protocol and wireless technology. The signal resolution
up to 4K×2K. It requires no cables between sender (TX) and receiver (RX)
which makes the installation easy and clean.
•
Introduction
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big
signal loss.
1. Transmit HDMI signal from source device to display device up to
200meters wirelessly.
2
. Support IR remote control function to control source device content
from long distance.
3
. No cable between sender(TX) and receiver(RX)
4
. Easy and clean installation
•
Features
•
Package contents
IR receiver extension
cable*1pcs
User manual*1pcs
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device ( SDTV, HDTV, and projector etc.).
•
Installation Requirement
•
Panel description
IR
OUT
IR
IN
