17
Ascending configuration, descending configuration
: convenient for customers to configure
the channel.
Apply configuration: when all output channels are configured, click apply configuration and
the system will automatically issue and save.
5.2.3 Create more wall
Step 1
: perform step 1 of 5.2.1 to create a wall for a single device. Click add to create a new
wall.
5.3 Create a signal source
If the system needs to be configured with the video matrix, or the signal source is managed,
the signal source management function is used.
Step 1 : open the source list.
Step 2
: right-click to create a category and enter the category name.
Step 3
: in the signal source list, go to the category you just created, right click to create the
category, and if you need to add a title when the source is displayed, write the displayed characters
in the title bar. If any matrix Settings are involved, turn on the matrix toggle switch. Write
protocol.
