Brightlink 16U, Manual

Page: 27 / 35

22
The system has a variety of control types: serial port, key, infrared, network and mobile
control terminal, in which serial port control is the basic control method. The communication
serial port has a set of RS-232 series ports that can connect to the ASCII/16 terminal or any
computer with this series of ports, and the command is transferred from the terminal or computer
to the controller. The system provides a set of control software, based on serial port, while
providing a set of basic instruction sets to control communication.
Name Format Description
Return
code
Test instruction <Enter>
This command is used to test whether the serial
port is communicating properly.
<Enter>
Window Reset
Instruction
reset
This command closes all windows and displays
a black screen.
<Enter>
Open the
window and
set the location
of the window
Dwinsize id
x1 y1 x2 y2
Note: This command is used to open a PC
window and locate it.
Example: Dwinsize 0 1024 0 2048 768
Display PC1 window at (1024,0) - (2048,768)
Example: Dwinsize 2 2048 768 3072 1536
Display PC3 window at (2048, 768) - (3072,
1536)
<Enter>
Vwinsize id
x1 y1 x2 y2
Note: This command is used to open the Video
window and locate it.
Example: Vwinsize 0 1024 0 2048 768
Display Video1 window at (1024,0) -
(2048,768)
Example: Vwinsize 1 2048 768 3072 1536
Display Video 2 window at (2048, 768) -
(3072, 1536)
<Enter>
Bwinsize id
x1 y1 x2 y2
Note: This command is used to open the bottom
window and determine the location of the
window.
Example: Bwinsize 0 000 2048 1536
Display HD 1 window at (0,0) - (2048,1536)
position: Bwinsize 200 12288 2304
Display HD 3 windows at (0,0) - (12288,2304)
Close the
specified
window
winswitch id
0
This command closes the specified window <Enter>
Chapter 8 Product Communication Protocol